GM Tech2 Parts

By GM Tech2 -
GM Tech2 Parts information,with the following gm tech2 parts,your GM Tech 2 will be more powerful.


32 MB Card For GM Tech2

32MB Card,works with GM TECH2, includes a 32MB PC Card loaded with the latest released GM Software.We are available with six kinds of software including SAAB, OPEL, GM, ISUZU, Suzuki and Holden.

32 MB Card For GM Tech2


 OBD2 16PIN connector for GM TECH2, it is only a obd2 connector, can not use alone. It is for those customer who has gm tech2 but want have one more connector.

OBD2 16PIN Connector for GM TECH2 Diagnostic Tool

 TIS2000 CD and USB Key for GM TECH2

 This is TIS2000 software for GM TECH2, especially for GM car model.With TIS2000 CD and USB KEY,GM Tech2 can be used for programming.TIS2000 support cars until 2007 year.

TIS2000 CD and USB Key for GM TECH2 GM Car Model

Main Test Cable for GM TECH2

Used together with GM TECH2, can not works alone. It used to connect GM TECH2 with car for diagnose.

Main Test Cable for GM TECH2

GM Tech2 VCI Module

If your GM Tech VCI is bad, you can buy a new GM Tech2 VCI module.

GM Tech2 VCI Module

CANDI Interface for GM TECH2

An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnosis on a vehicle that uses the CAN interface, you will need the Tech 2 Flash and a CAN diagnostic interface module.

The CANDI module connects between the Tech 2 Flash’s diagnostic link cable and the OBD adapter. Once the CANDI module is connected, it can be used on all GM vehicle applications, even those vehicles using other platforms such as OBD I and OBD II.Includes the CAN diagnostic interface module and instruction sheet.

CANDI Interface for GM TECH2

Comments

  1. UnknownAugust 5, 2014 at 1:47 AM

    Thanks for sharing! This page was very informative and I enjoyed it. Vehicle diagnostic systems

    ReplyDelete

Post a Comment

Popular posts from this blog

VXDIAG VCX NANO GM + TIS2000: Works Good!

By -
VXDIAG VCX NANO GM  +  TIS2000 : IT works!! ok for anyone trying to use the VXDIAG GM nano with SPS this is what you need to do (order is important): *** please note you cannot use the VM that the VXDIAG package comes with (GDS2 VM). It’s configured in such a way it won’t work with the dongle crack and caused me a lot of head scratching to find this out. 1. Create a windows XP 32bit VM using VMWare Player 2. Make sure you add an LPT port (set to auto, not connected on startup). It doesn’t matter if your actual PC has an LPT port or not this is needed for the dongle crack later. 3. Install VMWare tools for your VM 4.After you have the windows VM up and running install the BOSH MDI drivers found (theMDI drivers on the driver disk and vxmanager installer wouldn’t install on my xp 32bit VM but the one from bosh does). 5.From the driver disk or from  allscanner.com  install the VXDIAG MDI package with pass thru driver (VXDIAG MDI manager or VXDIAG Manager) Free download tis_data_
Read more

GM Diagnostics FAQs (MDI, GDS2, Tech2win)

By -
Good questions and answers of GM diagnostic test. Just share some i think good to share with you all. Hope it helps. Question:  That screen does look exactly like my  Tech II  menus. Some sort of emulator I'm guessing. Nice find. Edit: Curious how you connected the laptop to your obd 2 port? Answer:  you plug the device into the OBD2 port, and then you either use Wifi back to the laptop to connect that way ($129), or you can use a usb cable instead ($119). Even through the device is using  GDS2 ,  MDI  and Tech2win software on the laptop side, the only thing that I have to question is if you can drive firmware upgrades through it to reprogram modules if needed as well? Now the bad news that maybe the op can bring us up to speed, did you mange to get the tech2 win to install on a 64 bit machine with 64 bit windows, or did you install tech2win and the rest of the software a 32windows machine only isntead. Question:  First GDS2 works with the included software as a
Read more

GM Tech2 clone program ECU with SPS in TIS2000

By -
Image
Here is the step-by-step instruction on programming GM (General Motors) ECUs with Tech2 scanner and SPS (Service Programming System) application in TIS2000 . NOTE: Before using the SPS, make sure that the Tech 2 scan tool and the pc contain the latest software, the battery of the vehicle is fully charged, only the ignition is on power, and all cables are connected properly. TIS2000 will not work on 2007 up GM, and software must work together with TIS2000 USB key. If you need to program Saab ECU, you had to use Saab TIS2000 and USB dongle. Main steps: Step 1: Instruction for TIS2000 software Step 2: Data request Step 3: Data exchange Step 4: Program ECU Alternative Programming with “Pass Thru” Check Programming result Step 1: Instruction for TIS2000 software 1.Connect the Tech II to the pc. Note: The hardware key (HWK) has to be registered prior to working with ‘Service Programming System’. To register a hardware key, the form that is enclosed with the h
Read more