GM Tech2 GM Diagnostic Scan Tool

By GM Tech2 -
GM Tech2 is Professional Auto Diagnostic Tool for GM vehicles.It supportsall GM systems from 1992 to 2011.

GM Tech2 software Version:

GM English 32.007
SAAB English 148
OPEL English 126
Holden English 145
SUZUKI English 01.210.020
ISUZU English K line 11.53

GM Tech2 car model supported:

GM/SAAB/OPEL/SUZUKI/ISUZU/HOLDEN


GM Tech2 specification:

1) Dimensions: 12
2) Microprocessor: 32 bit,16 MHz
3) Memory: 32 MB flash type II PCMCIA. Type III slot available for future expansion.
4) Communications: Integral RS232 communication port.
5) Screen: 3.8.8 backlit monochrome with full graphics capability: 320,40 pixels. Displays up to 9 vehicle parameters at once .Download Tech2 Brochure (5.2 Mb)

Tech2

GM Tech2 Features:

 1) Authentic GM software in the Tech 2 Flash means the most comprehensive diagnostic software available for late model GM vehicles.
2) Support for on-board diagnostics on all GM systems 1992 thru 2011.
3) Removable hardware modules provide insurance against scan tool obsolescence.
4) Large, easy-to-read backlit screen.
5) RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash.
6) Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.
7) Ability to view the status of vehicle diagnostic tests as they run.
8) Bi-directional The authentic GM 1992-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics.

An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flashs diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications,even those vehicles using other platforms such as OBD I and OBD II.

GM Tech2 Scan Tool

Tech2 Vehicle CAN Interface:

 05 Buick Allure (3.6L)
05 Buick LaCrosse (3.6L)
05 Buick Rainier (5.3L)
04-05 Buick Rendezvous (3.6L)
04-05 Cadillac CTS (3.6L)
04-05 Cadillac SRX (3.6L / 4.6L)
04-05 Cadillac XLR (4.6L)
05 Cadillac STS (3.6L / 4.6L)
05 Chevrolet Cobalt (2.2L)
05 Chevrolet Corvette (6.0L)
05 Chevrolet Equinox (3.4L)
05 Chevrolet TrailBlazer (5.3L)
05 Chevrolet SSR (6.0L)
04 Chevrolet Malibu (Body/Chassis only)
05 Chevrolet Malibu (3.5L)
05 GMC Envoy (5.3L)
05 Pontiac G6 (3.5L)
05 Pontiac GTO (6.0L)
05 Pontiac Pursuit (2.2L)

GM Tech2 Package List:

Tech-2 Flash Tester
32 MB PCMCIA Card with GM OE Applications
CAN diagnostic interface module(CANdi) and instruction sheet download (199.2 kb)
RS232 cable and user manual
RS232-DB9 adapter
DLC Cable, DLC Loopback Adapter
12V Cigarette Lighter Power Cable
SAE 16/19 Adapter
NAO 12/19 Adapter
Battery Power Cable
Storage Case
TIS 2000 CD

Gm tech2 diagnostic tool

 Go to check more details:

 GM Tech2 GM Diagnostic Scanner For GM/SAAB/OPEL/SUZUKI/ISUZU/Holden

GM Tech2 Diagnostic Scanner




Comments

  1. UnknownJune 12, 2014 at 1:58 AM

    Hey,excellent blog, it provide the information about Diagnostic Scan tools, thanks for posting.

    Garage tools

    ReplyDelete

Post a Comment

Popular posts from this blog

VXDIAG VCX NANO GM + TIS2000: Works Good!

By -
VXDIAG VCX NANO GM  +  TIS2000 : IT works!! ok for anyone trying to use the VXDIAG GM nano with SPS this is what you need to do (order is important): *** please note you cannot use the VM that the VXDIAG package comes with (GDS2 VM). It’s configured in such a way it won’t work with the dongle crack and caused me a lot of head scratching to find this out. 1. Create a windows XP 32bit VM using VMWare Player 2. Make sure you add an LPT port (set to auto, not connected on startup). It doesn’t matter if your actual PC has an LPT port or not this is needed for the dongle crack later. 3. Install VMWare tools for your VM 4.After you have the windows VM up and running install the BOSH MDI drivers found (theMDI drivers on the driver disk and vxmanager installer wouldn’t install on my xp 32bit VM but the one from bosh does). 5.From the driver disk or from  allscanner.com  install the VXDIAG MDI package with pass thru driver (VXDIAG MDI manager or VXDIAG Manager) Free download tis_data_
Read more

GM Diagnostics FAQs (MDI, GDS2, Tech2win)

By -
Good questions and answers of GM diagnostic test. Just share some i think good to share with you all. Hope it helps. Question:  That screen does look exactly like my  Tech II  menus. Some sort of emulator I'm guessing. Nice find. Edit: Curious how you connected the laptop to your obd 2 port? Answer:  you plug the device into the OBD2 port, and then you either use Wifi back to the laptop to connect that way ($129), or you can use a usb cable instead ($119). Even through the device is using  GDS2 ,  MDI  and Tech2win software on the laptop side, the only thing that I have to question is if you can drive firmware upgrades through it to reprogram modules if needed as well? Now the bad news that maybe the op can bring us up to speed, did you mange to get the tech2 win to install on a 64 bit machine with 64 bit windows, or did you install tech2win and the rest of the software a 32windows machine only isntead. Question:  First GDS2 works with the included software as a
Read more

GM Tech2 clone program ECU with SPS in TIS2000

By -
Image
Here is the step-by-step instruction on programming GM (General Motors) ECUs with Tech2 scanner and SPS (Service Programming System) application in TIS2000 . NOTE: Before using the SPS, make sure that the Tech 2 scan tool and the pc contain the latest software, the battery of the vehicle is fully charged, only the ignition is on power, and all cables are connected properly. TIS2000 will not work on 2007 up GM, and software must work together with TIS2000 USB key. If you need to program Saab ECU, you had to use Saab TIS2000 and USB dongle. Main steps: Step 1: Instruction for TIS2000 software Step 2: Data request Step 3: Data exchange Step 4: Program ECU Alternative Programming with “Pass Thru” Check Programming result Step 1: Instruction for TIS2000 software 1.Connect the Tech II to the pc. Note: The hardware key (HWK) has to be registered prior to working with ‘Service Programming System’. To register a hardware key, the form that is enclosed with the h
Read more